These ten panels are connected in a row. The meter shows their combined voltage when no power is being drawn.
For explanation, not installation wiring.
Why panels must match the inverter
Your inverter turns electricity from the panels into power your home can use. It has limits, so adding more panels is not always a simple upgrade.
- Panels are often connected in groups. Connecting more panels in a row raises their combined voltage — a measure of electrical pressure.
- Panel voltage rises in colder conditions. The installer must allow for this when planning how many panels to connect together.
- Too much voltage can damage the inverter, even if the panels’ total wattage looks suitable.
See an example
In the illustration, ten panels rated at 52 volts each add up to 520 volts with no power being drawn. That is already above the example inverter’s 500-volt limit. Colder panels would raise it further.
Ask your installerWill the planned panel groups stay within my inverter’s limits, including on the coolest days?
Get a Free Solar Assessment